Toward the Optimized Spintronic Response of Sn‐Doped IrO2 Thin Films

Amorphous and polycrystalline Sn‐doped IrO₂ thin films, Ir_1‐xSn_xO₂, are grown for the first time. Their electrical response and strength of the spin–orbit coupling are studied in order to better understand and tailor its performance as spin current detector material. These experiments prove that the resistivity of IrO₂ can be tuned over several orders of magnitude by controlling the doping content in both the amorphous and the polycrystalline state. In addition, growing amorphous samples increase the resistivity, thus improving the spin current to charge current conversion. As far as the spin–orbit coupling is concerned, the system not only remains in a strong spin–orbit coupling regime but it seems to undergo a slight enhancement in the amorphous state as well as in the Sn‐doped samples.     

Melt processing of ethylene–vinyl acetate/banana starch/Cloisite 20A organoclay nanocomposite films: structural,thermal and composting behavior

This work shows the preparation of ethylene vinyl acetate copolymer/banana starch/Cloisite 20A organoclay (EVA/starch/C20A) nanocomposites by melt processing. Wide angle X-ray diffraction (WAXD), field emission scanning electron microscopy (FE-SEM), differential scanning calorimetry and thermogravimetric analysis were used to characterize the obtained nanocomposites. Mechanical properties were also determined. In addition, the performance of the nanocomposite films under composting was preliminarily studied; it was conducted using the soil burial test method. Despite knowing that the starch is difficult to process by extrusion, nanocomposite films with high homogeneity were obtained. In this case, C20A organoclay acts as an effective surfactant to make the starch natural polymer compatible with the EVA synthetic polymer. The good compatibility between EVA, starch and C20A clay was also deduced by the formation of intercalated and intercalated-exfoliated structures determined by WAXD and FE-SEM. Physical evidence of the damage in EVA/starch/C20A nanocomposite films after the composting test was observed. It is worth noting that despite the absence of starch, the EVA/C20A nanocomposite film, used as a control, also showed surface damage. This behavior is related to the organic modifier linked to clay C20A, which contains molecules derived from fatty acids that can be used as a food source for microorganisms.

     

Theoretical and experimental studies of a new aniline derivative corrosion inhibitor for mild steel in acid medium

4-Chloro-N-(pyridin-2-ylmethyl)aniline (CPYA) was synthesized by a simple and inexpensive method and tested as a corrosion inhibitor in acid medium for mild steel by using gravimetric studies and electrochemical measurements. An average maximum efficiency of 96.0% was achieved at 4.59 mmol/L. Corrosion kinetic and thermodynamic parameters were also analyzed. Surface analyses (atomic force microscopy and scanning electron microscopy) show that protection is enabled by adsorption on the metal, forming a film. Quantum chemical calculations were performed to access information regarding the molecular structure in the corrosive medium and to support interpretation of the results obtained by experimental methods.     

Double emulsions (W/O/W): physical characteristics and perceived intensity of salty taste

This study addressed the correlation between physical characteristics of double emulsions and sensory perception, as the microstructure of these systems may provide the mechanism to understanding the initial cause of the altered salty taste. Thus, double emulsions (W/O/W) were prepared using different volumes of the internal aqueous phase while maintaining the same fat and sodium contents in the evaluated systems. Polyglycerol polyricinoleate (PGPR) and tween 80 were used as hydrophobic and hydrophilic emulsifiers, respectively. After preparation, the samples were stored at 25 °C for 4 days and submitted to analysis of optical microscopy, distribution and polydispersity of the oil droplets size, electrical conductivity, rheological behaviour and sensorial analysis. It was found that the use of different emulsifier concentrations (PGPR) did not influence the physical characteristics of the emulsions with the same formulation, but emulsions with different internal aqueous phase concentrations presented different results. These distinct characteristics may have influenced sensorial perception, as the emulsion with higher internal phase concentration was considered saltier. Thus, it can be concluded that structural differences of the double emulsions can be used to decrease the sodium contents without perceivable changes in salty taste.     

Increasing the photocatalytic and fungicide activities of Ag3PO4 microcrystals under visible-light irradiation

The present study reports for the first time the performance of silver phosphate (Ag₃PO₄) microcrystals as photocatalyst (degradation of Rodamine B-RhB) and antifungal agent (against Candida albicans–C. albicans) under visible-light irradiation (455 nm). Ag₃PO₄ microcrystals were synthesized by a simple co-precipitation (CP) method at room temperature. The structural and electronic properties of the as-synthetized Ag₃PO₄ have been investigated before and after 4 cycles of RhB degradation under visible light using X-ray diffraction (XRD), micro-Raman spectroscopy, UV–Vis spectrophotometer and field emission scanning electron microscopy (FE-SEM) images. The antifungal activity was analyzed in planktonic cells and 48h-biofilm of C. albicans by colony forming units (CFU) counting, confocal laser and FE-SE microscopies. Statistical analysis was carried out using SPSS software. Morphological and structural modifications of Ag₃PO₄ were observed upon recycling. After 4 recycles, the material maintained its photodegradation property; an eightfold increase in the efficiency of Ag₃PO₄ was observed in planktonic cells and a two fold increase in biofilm when irradiated under visible light. Thus, higher antifungal effectiveness against C. albicans was obtained when associated with visible-light irradiation.     

NiMo/C Used as Magnetic Support for SILP Catalysts

In this work, supported ionic liquid (IL) phases catalysts were prepared based on Pd dispersed in IL phases supported on magnetic particles of nickel/molybdenum covered with carbon (NiMo/C). The magnetic support was prepared via CVD method at 800 °C. XRD analysis showed the phases of metallic nickel and molybdenum carbide. The presence of carbon in these materials was confirmed by TEM/EDS and thermogravimetric analysis (TG) analysis. Pd particles were dispersed in 1 and 2.5 wt% of the IL 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm·BF₄), which were immobilized on the support surface via impregnation method. TG analysis shows a weight loss between 300 and 420 °C attributed to the BMIm·BF₄, confirming the existence of IL on the support surface. The prepared materials were investigated in hydrogenations reactions of 1,5-cyclooctadiene and nitrobenzene, and the influence of IL on the activity and selectivity of these catalysts were observed. These materials have great potential for catalysis applications, because they bring together the advantages of the IL in the catalyst surface and the facility of magnetic materials separation.     

Effects of timing of formative feedback in computer-assisted learning environments

This study examines the effects of timing of corrective formative feedback on processing text information on question-answering. Undergraduate students read an expository text and answered questions in two attempts. Students were randomly assigned to a no feedback, immediate feedback and delayed feedback conditions. Students in the feedback conditions received feedback on the correctness of their answer after the first attempt and were informed about the right answer after the second attempt. Students were prompted to restudy the text after failing in their first attempt. However, students in the no feedback condition were just prompted to search the text. All students were tested on question-answering, corrective probability and a post-test cued-recall test. Results showed that: (a) feedback reduced the initial time reading the text; (b) feedback increased performance on question answering and cued-recall; (c) delayed feedback produced no advantages over immediate feedback. Theoretical and practical implications of these results are discussed.